LED Neon Flex Ultra-slim 4 mm wide - Warm White 3000K - 120 LEDs/m IP67 Waterproof - per 50cm

Flexible LED Neon Flex Tube by the roll. Price per 50cm. Max. length in one piece: 5 meters.
The Neon Flex Tube is delivered in one continuous piece up to 5 meters. Example: If you add 3x to your cart, you’ll receive a 1.5-meter Neon Flex tube. If you add 15x, you’ll receive one 5-meter tube and one 2.5-meter tube. And so on.

This ultra-slim LED Neon Flex is extremely flexible and can be bent into tight curves with a bending radius of about 1cm.

Neon is ideal for smooth light lines laid in curves, such as a light line in the floor, along a wall, or for light signage! Additionally, the light is fully diffused, so the Neon Flex tube can be visible; there are no light dots like on regular LED strips.

Neon Flex consists of a silicone U-profile containing an LED strip. Neon Flex can be cut every 5cm, and power is supplied via the soldering points on the LED strip.

Voltage: 24V. Our LED Neon Flex works like regular LED strips and can therefore be used with all LED strip power supplies and controllers.

You need a power adapter for this LED Neon Flex. It can also be dimmed using a standard LED strip dimmer. Check the categories Accessories -> Power Supplies and Accessories -> Controllers for options.

The more LED Neon you connect, the higher the power consumption and the larger the power supply should be. The consumption of this neon is 7 watts per meter. Keep this in mind when choosing a suitable power supply.

Note: If you connect more than 20 meters in one piece, connect both ends to the power supply to prevent voltage drop. When using a LED strip dimmer, ensure you don’t exceed the maximum current of the dimmer.

Soldering: Each 5-meter length of Neon Flex is pre-fitted with wires. For shorter lengths, you’ll need to solder a wire yourself. We can do this for you: Add "Soldering Service for Flexible LED Strips" to your cart, and we’ll deliver ready-to-use Neon. See Accessories -> Service.

Cutting and mounting: This LED Neon Flex can be cut, but the ends of the cut section must be made waterproof again. Use the separately sold end caps and silicone glue for this. The mounting clips are also sold separately (see related products or Accessories -> Accessories for IP68 LED Strips).