Standalone RGB LED Strip 60 LED/m 10 meters
This high-quality RGB LED strip supports 16 million colors. This allows you to create any desired atmosphere, from romantic to festive or calming.
Unlike some low-quality LED strips, our LED strip is equipped with a heavier flexible circuit board of 2OZ/m². As a result, the strip gets less warm, is safer, and experiences less power loss.
The separate strip has a length of 2 meters and contains no less than 60 LEDs per meter. The 60 LEDs per meter ensure a nice, even light output.
This strip is equipped with "5050" type LEDs, which offer excellent light output. Combined with the power of 12 watts per meter, this provides a powerful, bright appearance. Because the RGB LED lights are also dimmable, you can create any desired ambiance.
Create a great ambiance with this LED strip, or use it for practical applications, such as under cabinets or as stair lighting. Thanks to the self-adhesive tape, this strip is easy and quick to install.
You can easily connect and control this light strip with all smart systems, such as Philips Hue, Alexa, and Zigbee.
IP20 and IP68 (waterproof strip)
This separate RGB LED strip is available in IP20 (non-waterproof) and IP68 (fully waterproof).
You buy IP20 for dry indoor spaces. You buy IP68 for humid areas, such as the bathroom and kitchen, or for outdoor use, such as in the garden or under a canopy.
The waterproofing of the IP68 LED strip is better than that of IP65, IP66, and IP67. IP68 strips are the only strips where no water, moisture, dust, or air can penetrate, making them last longer.
When shortening an IP68 strip, it must be sealed afterwards with a special end cap with strain relief and silicone sealant to make the strip waterproof again.
LED strip in 12 or 24 volts
You can also choose between 12 and 24 volts.
For shorter LED strips up to 5 meters, 12 volts is fine. For longer LED strips from 5 meters, we recommend buying a 24-volt strip. These LED strips are powerful with minimal power loss, even at longer lengths.
For a 12-volt connection, for example in the car or on a boat, you also buy the 12-volt LED strip.
Various LED strip lengths
This LED strip is available in many different lengths:
This LED strip is very easy to shorten by simply cutting it to size. This LED strip is easy to shorten thanks to the indicated cutting lines.
Smart RGB LED Strip
This smart RGB LED strip is easy to connect and control with all kinds of smart systems, such as Zigbee, Ikea Tradfri, Philips Hue, Google Assistant, and Alexa. For this, buy a Zigbee controller.
What's in the box?
- RGB LED strip
- Connection wires
The strip is equipped with stripped connection wires. These wires can be easily screwed into a controller. You can also extend these wires with your own cable.
- Article number: rgb.60.5050.10m
- Waterproof: IP68 (Optional)
- Length: 280 mm
- Color: RGB
- Luminous flux: Max. 1000lm/m
- CRI (Color Rendering Index): >80
- Beam angle: 120°
- Voltage: 12V / 24V DC
- Current per meter: 1A per meter (12V) / 2A per meter (24V)
- Power per meter: 12W
- Cut unit: 5cm (12V) / 10cm (24V)
- Width: 10mm (IP20) / 12mm (IP68)
- Height: 2mm (IP20) / 5mm (IP68)
- LEDs per meter: 60
- LED Type: 5050
- LED Brand: Epistar
- Can be cut to size: Yes
- Equipped with adhesive strip: Yes