LED Strip Waterproof Neutral White - 4.8W/m IP68 - per 50cm

Flexible LED Strip from the roll and available to order in custom lengths. Choose the length you want and optionally order multiple (different) lengths. The LED Strips will be supplied in one continuous length up to a maximum length of 5 meters. Multiple strips can be connected together to achieve a longer length.

12 Volt / 24 Volt: Available in both 12 Volt (standard) and 24 Volt. Scroll a bit further up and check under "voltage" to indicate your choice.

IP68 Extrusion waterproof. Suitable for outdoor and underwater use

This strip is IP68 waterproof and suitable for all damp environments, outdoor use, and even underwater. Unlike many LED strips sold online, this strip is made from a single solid silicone extrusion, meaning there are no weak points, and moisture cannot leak in.

When you cut a strip, you need to ensure you seal the ends to make them waterproof again. If you order a 5-meter length, it already comes with end caps and pre-soldered cables, but for shorter lengths, you will need to seal the ends yourself. For this, use a closed end cap or end cap with cable entry and silicone sealant.

Flexible LED strip with adhesive backing for easy attachment. You can also use mounting brackets. This LED strip is very easy to install. You can shorten the strip yourself per 3 LEDs (12V) / 6 LEDs (24V). Furthermore, this LED strip is highly flexible and tight bends are possible. The power supply runs through the solder points found every 5cm (12V) / 10cm (24V) on the strip.

Soft, neutral white light, suitable for various applications

The white tone of this strip is neutral white, 4000-4500K. This is a pleasant-looking, soft white color that is not yellowish, nor cold white. It is a neutral white color that is very gentle on the eyes and suitable for various applications such as office lighting, workshop lighting, kitchen lighting, but also as lighting above your desk, workbench, or reading light.

Which power adapter do I need?

This strip works with 12 Volt / 24 Volt, so to connect it to a power outlet, you will need a power adapter. Check in the category Accessories -> Power Supplies.

For a 12 Volt LED Strip, choose a 12 Volt power supply

For a 24 Volt LED Strip, choose a 24 Volt power supply

Which power adapter do you need? This depends on the total wattage of your LED strip. This LED strip consumes 4.8 Watts per meter. For example: If you want to connect 5 meters of LED strip with 4.8 Watts per meter, you will need a power adapter of at least 5 x 4.8 = 24W. If you want to connect, for example, 10 meters of LED strip with 4.8 Watts per meter, then the adapter should be at least 48 Watts (10 x 4.8W). You can always choose a slightly heavier adapter than needed, as it will never supply more power than necessary. For example, you can connect 48 Watts of LED strip to a 60 Watt adapter, and the power consumption will not exceed 48 Watts as the power supply adjusts accordingly.

Connecting long lengths?

Ensure that there is at least a direct power connection every 10 meters, otherwise, voltage drop will occur in the LED strip causing the last LEDs to be less bright.

Soldering

If you order an LED strip + adapter, we will always include a wire or connector that can be soldered onto the LED Strip and fits the adapter. Don’t want to solder yourself? No problem, we can do this for you. Add soldering service for flexible LED Strips to your shopping cart, and we will ensure you receive a ready-to-use strip(s).

For more information on how to connect flexible LED strip(s), you can consult the manual.