Solder-free connector IP67 2 pin 8mm PCB Strip-to-Strip with cable

This solder-free connector is reliable and very easy to use. Because this connector fits very tightly around the LED strip, it is IP67 waterproof. In addition, the connector makes a reliable connection because the contact points are firmly pressed into the LED strip and the soldering points.

Your LED strip is ready to use in just 3 seconds!

1) Prepare all parts

2) Slide the clear cover over the soldering point of the LED strip. Make sure that the opening is directly above a soldering point.

3) Slide the connector over the LED strip + cover and press the contact points firmly into the LED strip. Push the connector until it clicks into place.

4) Ready to use! Connect the LED strip to the power supply.

Suitable for: IP68 Waterproof LED strips with a PCB of 8mm wide and with 2 contact points. (LED strips with a width of 10mm and thickness approx. 4.5mm). This includes most of the single-color 3528 IP68 waterproof LED strips on our site. When in doubt, you can always contact us! We will also always manually check your order to make sure that the connectors match the LED strips. So you don't have to worry about receiving the wrong connector.

Type: IP-SC-2PIN-8MM-C 2x connector with 17cm cable in between.