LEC3 Digital LED strip Controller Art-Net incl. Software

Ethernet controller for Digital LED Strips / LED Pixels. Supports Art-net, LED Strip Studio software (included), DMX 512. Also works in stand-alone mode. Advanced web-configuration is possible using your web browser or mobile app.

Multiple LEC3's can be coupled together in an Ethernet network, so you can control an infinite number of (RGB) Pixels.

A single LEC3 supports up to 4096 RGB LEDs / 3072 RGBW LEDs or 24 full Art-Net Universes.

Specifications:
Weight: 469 g
Dimensions: 142 × 69 × 44 mm
Maximum of LEDs: 4096
SPI LED Outputs: 4
Maximum of LEDs per Output: 1024
Required power: 5-24V/ 0.3A (PCB only, wihout the LED strips / LED pixels)
Maximal current: 10A
Power connector: pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY
SPI OUT connector: pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY
DMX input connector: XLR 3-pin connector (optional 5 pin)
DMX output connector: XLR 3-pin connector (optional 5 pin)
Ethernet: 2x RJ-45 connector, internal switch, 100 Mbit/sec
SD Card: Micro SD Card (FAT32, up to 32GB)
Dimensions: 142 x 69 x 44 mm
Documentation: Download
Size: 1024-pixels (6 Art-net universes), 2048-pixels (12 Art-net universes), 4096-pixels (24 Art-net universes)
Warranty: 5 years
Supported ICs, amongst others: TM1809, WS2811, WS2812, APA102, APA102_DOUBLE, APA102 16bit, D705, LPD6803, LPD8806, MBI6120, SM16716, SM16726.